Under the trend of portability of medical equipment and intelligence of beauty devices, the "safety and compliance, efficient adaptation, and full-scenario compatibility" of power supply solutions have become the core demands. The PD Medical Charger series UES23LZ-SPC medical-grade PD fast charging power adapter launched by UE Electronic takes "medical-grade safety certification + multi-protocol fast charging + global adaptation design" as the core. To become a highly reliable power supply solution for the medical and I.T.E (Information Technology equipment) fields.

I. Core Advantages: Based on medical-grade security, with dual excellence in performance and adaptability

As a star model of the PD Medical Charger series, the core competitiveness of UES23LZ-SPC lies in "safety and compliance coverage + multi-scenario performance redundancy", and the specific highlights are as follows:

Medical-grade safety: Dual protection, all-round compliance

UES23LZ-SPC strictly adheres to the electrical safety standards for medical equipment. It is equipped with A standard 2MOPP (dual patient protection) input-output isolation design, combined with an ultra-low leakage current (contact leakage current) of ≤100μA, eliminating the risk of electric shock to both medical staff and patients at the circuit level. It fully complies with the IEC 60601-1 medical equipment safety regulations. It has simultaneously passed international safety certifications such as CB and TUV-SUD, and meets the EMC (electromagnetic compatibility) requirements of I.T.E equipment (conforming to standards such as EN55032 and CISPR 11), achieving dual safety coverage in the "medical + consumer electronics" fields.

2. PD Fast Charging Protocol: Multi-speed intelligent adaptation, maximizing efficiency

This model is equipped with dual fast charging protocols of USB PD 3.0+QC 3.0, supporting multiple voltage output levels of 5V/9V/12V (with a maximum power of 22.5W), and can dynamically adjust the power according to the device requirements - it can not only provide stable and small current power supply for low-power medical devices (such as blood glucose meters), It can also achieve efficient fast charging for medium-power devices (such as portable monitors), with charging efficiency increased by more than 30% compared to traditional linear power supplies. The standby power is ≤100mW at the same time, which meets the green energy-saving standards and reduces the long-term operating costs.

3. Global scene Adaptation: All-dimensional compatibility from altitude to insertion

One of the core highlights of UES23LZ-SPC is its "universal design"

Environmental adaptability: Supports stable operation at an altitude of 5,000 meters, can withstand working temperatures ranging from 0℃ to 40℃ and storage temperatures from -40℃ to 60℃, and is suitable for special scenarios such as high-altitude medical stations and outdoor mobile medical vehicles.

Pin compatibility: It adopts a "replaceable pin design", supporting the switching of global mainstream pins such as those from the US, Europe, the UK, and Australia. It can cover the global market without the need for additional adapters.

Durability: Tested in accordance with the MIL-HBK-217 standard, the MTBF (Mean Time Between Failures) is over 100,000 hours (at 25℃), significantly reducing the frequency of equipment maintenance and enhancing reliability throughout the service life cycle.

4. Structure and Interface: Portability and stability are balanced

The model adopts a "wall plug design + fixed USB interface", with dimensions of only 76.4×32.1×30.0mm (excluding pins) and a weight of 154g, balancing portability and installation stability. At the same time, it passes the 4000VAC input-output dielectric strength test and the 10MΩ insulation resistance test to ensure electrical stability under long-term plugging and unplugging as well as high-load operation.

Ii. Compatible Products: Covering both the medical and I.T.E fields

Based on the features of "medical-grade safety + multi-protocol fast charging + global compatibility", the UES23LZ-SPC can be precisely matched with the following devices

1. Medical equipment category

Portable diagnostic devices: handheld blood glucose meters, portable ultrasound probes, mobile electrocardiogram monitors, etc., which require small size, low leakage current and stable power supply.

Household medical equipment: small-sized home ventilators, rehabilitation and physical therapy devices, electronic thermometers, etc., civilian medical products that need to balance safety and energy efficiency;

Mobile medical devices: medical inspection PDAs, small-sized infusion pumps, small-sized vaccine refrigerators, etc., are scene devices that require high-altitude adaptation and long-lasting fast charging.

2. I.T.E and Commercial Equipment category

Commercial beauty equipment: small photorejuvenation devices, radio frequency introduction devices, etc., beauty devices that require PD fast charging and safety isolation;

Portable electronic devices: medical data collection terminals, portable printers, industrial handheld barcode scanners, etc., I.T.E devices that require global pin compatibility and high reliability.

Iii. Why Choose UES23LZ-SPC?

In the field of medical power supplies, "safety" is the bottom line and "compatibility" is the core. The UES23LZ-SPC not only has passed the medical-grade safety certification, but also covers the needs of multiple scenarios with features such as PD fast charging, global plugging, and high-altitude compatibility. Meanwhile, the MTBF of 100,000 hours provides a guarantee for the long-term operation of the equipment. It is a cost-effective power supply choice for equipment manufacturers in both the medical and commercial fields.